Reference: MGC320
Control unit / display card for command and control of the microprocessor-based generator set, designed for automatic intervention (ATS). For generators from 1 to 2000kVA
Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)
SICES GC250 Command and control card for generating sets from 1 to 2000kVA, MADE IN ITALY
Despite its compact size, the GC250 includes the main engine and alternator protections such as oil pressure, coolant temperature, fuel level, frequency, voltage, current and power.
GC250 can be used with electronic motors with CAN interface and J1939 and MTU MDEC protocols, and with traditional motors with analog interface.
By configuring the inputs, outputs and protections, the GC250 can be easily adapted to a wide range of applications.
GC250 offers a large 128x64 pixel graphic display that uses icons to display alarms/pre-alarms, for motor and controller status and for measurements.
All parameters can be set directly with the keyboard or using the free software tool (BoardPrg3), available on the SICES website.
Features
Single generator controller for standalone production (SPM) or grid emergency (SSB) applications.
Large LCD display with LED backlighting and icons.
Compact size.
Three-phase network sensor.
Suitable for three-phase and single-phase generators.
3 x generator current reading inputs.
True RMS measurements: kW, kVA, kVAr, pf, kWh (per phase and total).
4 configurable digital inputs.
3 configurable analog inputs + 1 (usable as digital) and 1 for D+.
Interface for traditional engines and CAN J1939.
USB serial port for configuration and firmware updates.
Data logs: 64 event logs, 64 (slow) + 42 (fast) periodic logs.
Built-in buzzer; Internal clock with lithium battery; Periodic testing.
Free BOARDPRG3 programming software.
Protections
Engine protections: Fuel reserve; Fuel level Min./max; Min./max battery voltage; Min./max. oil pressure; Min./max. oil and coolant temperatures; Maximum power (32); Failure to close group or network contactor; Failure to start; Over-speed by frequency; belt breakage; Operating conditions not met; Emergency stop.
Generator protections: Under-frequency (81U); Over-frequency (81O); Under-voltage (27); Overvoltage (59); Variable time overcurrent (51); Instantaneous overcurrent (50); Phase sequence (47); Voltage and current asymmetry (46/47);
Grid protections: Grid voltage Min./max. (27/59); Grid frequency Min./max. (81U/81O); Voltage asymmetry.
Power and power factor measurements are available as total and single phase measurements.
The maximum power and current values reached are stored with date and time.
Technical data:
Operating temperatures: -30°C to 70°C.; Storage temperatures: -30°C to 80°C.
Dimensions: 141 (W) x 113 (H) x 39 (D) mm.; Mounting slot dimensions: 118(W) x 92(H) mm.
Weight: 250gr.
128x64 LED backlit LCD display.
Degree of protection: IP65 (only with gasket correctly installed).
Display with Intuitive symbols
The GC250 display offers a complete set of quick and intuitive information, with clear symbols and fault codes.
When an engine ECU is connected, the description of its alarms is also available:
MINIMUM GENERATOR VOLTAGE; MAXIMUM GENERATOR FREQUENCY; OVERSPEED; MINIMUM FUEL LEVEL; MAXIMUM COOLANT TEMPERATURE; MINIMUM BATTERY VOLTAGE; CANBUS ENGINE FAULT.
Non-binding images and technical data.
For more information do not hesitate to contact us.
Use and maintenance manuals with connection diagram and mounting supports, 24-month warranty, invoice included and home delivery/collection
Data sheet
Control unit / display card for command and control of the microprocessor-based generator set, designed for automatic intervention (ATS). For generators from 1 to 2000kVA
Automatic voltage regulator (AVR) for diesel and gasoline generator models with Mr. Generator, Kipor, Kama and Kaipu brands with powers from 3.5 to 7kW, 230V.c.a. single phase.
AVR VOLTAGE REGULATOR FOR GENERATORS FROM 6 TO 8kW HALF MOON IN RUBBERIZED PLASTIC, MULTIFUNCTIONAL FOR ALL GASOLINE AND DIESEL GENERATORS.
AVR THREE-PHASE VOLTAGE REGULATOR WITH TOTAL 7 WIRES FOR CURRENT GENERATOR GENERATING SET FROM 4 TO 8kW HALF-MOON IN RUBBERED PLASTIC, MULTIFUNCTIONAL FOR ALL PETROL AND DIESEL GENERATORS.
AIR FILTER FOR SINGLE CYLINDER DIESEL ENGINES for KIPOR - KAMA - HYUNDAI FROM 10 TO 13HP
AVR VOLTAGE REGULATOR FOR GENERATORS FROM 4 TO 6kW HALF MOON IN RUBBERIZED PLASTIC, MULTIFUNCTIONAL FOR GASOLINE AND DIESEL GENERATORS.
Control unit / display card for command and control of the microprocessor-based generator set, designed for automatic intervention (ATS). For generators from 1 to 2000kVA
AVR AUTOMATIC VOLTAGE REGULATOR FOR GENERATOR SET MOD. GAVR 12A, MULTIFUNCTIONAL AND UNIVERSAL FOR ALL GENERATORS WITH GASOLINE AND DIESEL ENGINES.
AVR AUTOMATIC VOLTAGE REGULATOR FOR GENERATOR MARELLI M16FA655A "MARK V" FOR POWER FROM 10kVA TO 650kVA
Control unit/display card for the command and control of the CAM332 microprocessor-based generator set, set up for automatic intervention (ATS) with the possibility of remote control. For single-phase and three-phase generators from 1 to 2000kVA
Portable 10kVA power generator equal to 8kW in continuous EQUAL POWER and/or FULL POWER technology, same power in both single and three phase, gasoline OHV, 2 year warranty, electric start and battery included. PROFESSIONAL POWER.
AVR AUTOMATIC VOLTAGE REGULATOR FOR GENERATOR MARELLI M25FA600A FOR POWER FROM 10kVA TO 2000kVA
